|
čProduct
Summary
čVideo-Microscopes
čMiniScope
Accessories for MiniScope-Series:
 Calibration
scale
is needed to calibrate the MiniCcope when used as measuring microscope
 Stand MP for MiniScope MP
Low
profile stand to position the MiniScope at a fixed height. Perfect for viewing
and measuring cross-sections or thick objects. The fixed height allows for
precise calibration and repeatable measurements. Also lowers the magnification
12x / 140x with increased field of view
 Stand M2-II/Adapterlens
This
stand is designed to lower the magnification of the MiniScope to 6-40x and
increase field of view. Removable reducing lens allows more of the object to be
view and captured. Stand positions the scope at the correct height, 3” x 3” x 3
 Set
of Shims
The
shims are designed to view thick objects with the MiniScope and to adjust the
magnification and field of view.
The shims fit around the sample and raise the level of the Scope, allow for the
repeatable positioning of the scope.
Set of 4 rings of adjustment in 1/16“ (1,6 mm) increments to 1/2“
(12 mm)
 Colour
Filter Set
These
filters fit into the base of the MiniScope to filter and isolate a narrow
bandwidth of a single colour: blue, red, orange. Also included is an IR-pass
filter for performing IR fluorescence imaging
 Hard
Case
Water
tight hard case with pressure purge valve and strap, form fitted foam insert
 Light
Table 4x5"
Battery powered light tabel,, 10 x 12 cm light field, colour corrected 5400K for
background illumination
GPS-Module
GPS
system which plugs into a free USB port on a computer. METOCHECK Mini software
reads the information from the GPS receive and can insert that information into
any captured image or movie.
č to
top
Software and
Software Plug-ins:
MAC-Software
Driver-Software for MAC-computers, must be ordered separately as option
METOCHECK-Mini
Advanced software for digital imaging. Display, capture, record, edit, label,
measure, print, e-mail and imaging tools that anyone can use with special
advanced measurement tools. (Without calibration scale, must be ordered
separately)
Focus-Lock-Plugin
FocusLock™ is a software program which can enhance the depth of focus of images
from a microscope or video inspection system
Video Averager Plugin
Video
Averager™ is a software plugin which can eliminate the noise and improve the
low-light images from a microscope or video inspection system
Particle
Analyzer Plugin
Particle
Analyzer™ is a software program which can count the number of particles in an
image from a microscope or video inspection system
Footswitch
Software
Plug-in and footswitch to allow capture of still images and movies while
performing two-handed inspection. The footswitch needs an extra USP por
č to
top
| 
