The Peak Flexible Stand Loupe has a flexible arm, which extends in a freely-movable manner in vertical and horizontal directions from a solid and stabilized stand, and the lens at the tip of the arm can be freely set in height and inclination. Through the use of this stand, the viewer can continuously observe and inspect the specimen with an efficient posture, which makes both his hands free, and under the optimal lighting condition.
 

Type               Lens          Magnification      dimensions                   weight
2033-90          90 mm            2,2x               145 x 120 x 460 mm     1427 g
2033-100        100 mm           2x                 145 x 120 x 470 mm     1484 g
2033-115        115 mm           1,7x              145 x 120 x 470 mm     1527 g      

The multi-lens Desk Loupe is a wonderful desk-type loupe, which enables you to see things that, under normal conditions, are invisible. This is because four lenses with different magnifications are included in the viewer in front of you, which respond to your research and investigation requirements. The acrylic-resin lenses of the multi Desk Loupe, all having excellent and uniform stability in quality and transparency, are all manufactured using the latest techniques, and the main lens has been given a silicone-based hard coating.

Its stand has enough weight to capably withstand all possible working angles and, together with a serene black-finished pillar, suitable for decorative furnishings, it can be used freely to change the lenses’ positions.

If these lenses become dirty, remove dirt, etc., with a soft feather duster and lightly wipe the lens surfaces with silicone paper, lens wiping cloth, etc. Avoid the use of chemicals for wiping.

Caution: placing the lens under direct sunlight may constitute a fire hazard.
 

The Peak Stereo Viewer is a simple device designed for viewing a set of three-dimensional aerial photos in three dimensions.

This viewer is supported by two metal legs which are unfolded to a standing position. The viewer is then placed over the aerial photos, which are spread out on a flat surface, and the photos are viewed through the two lenses simultaneously with both eyes.
The coated glass lenses are 32mm in diameter and magnifying power is two times. The lenses can be easily adjusted for eye-to-eye width.

In general, of the overlapping set of photos, the one with the lower number is placed on the left side and the photo with the higher number on the right side. If this is not performed correctly, a mountain, for example, will look like a valley.

1994-2, 2x magnification. Size 160 x 70 x 120 mm, Weight 250 g.

1994-4, 4x magnification. Size 150 x 65 x 85 mm, Weight 250 g  

Mirror Stereo Viewer consisting of the view body and mirror is used for solid geometrically view and inspects stereo pictures for forestry, regional development projects etc.

weight:                              2650 g