WEBSHOP    START    Product highlights  News                                                                                

  

                                            

  

 

Home
Nach oben / Up

 

 

Product Summary    Dust-Removal-Systems

DRS-systems of ASMETEC 

METOCLEAN Dust Cleaning Rollers (DCR)  for adhesive (tacky) DCR-Pads

Similar DCR rollers are offered otherwise at highest prices but poor qualities. In some cases the handrollers simply don't do the job they are designed for and even can contaminate the substrates with debris or even silicone spots.

METOCLEAN DCR rollers are designed to perfectly clean the surfaces of flat panels, screens, foils etc from loose particles in sizes down to 0,5 m and then transfer these dust parts to the adhesive, tacky pads without any recontamination of the elastomer rolls or the substrates to be cleaned. The DCR can be used in any industry to remove dry, unattached particles of contamination from a production process to increase yield and improve quality.

Low quality handrollers don't offer ball bearing for smooth and clean rolling. Some simply scratch steel on plastic bearings and then generate finest dust with every rotation, invisible for the human eye but big enough to cause technical trouble in the subsequential manufacturing processes.

ASMETEC assures highest available quality and precision on all METOCLEAN DRS-System components.

All parts are designed for long-life cycle, the ball bearing guarantee no generation of wear debris. All handrollers are made with a special composition of elastomer rubbers wth enduring tackyness to uptake dust, hair, dander, debris, etc down to a particle size of 0,5 m from any surface. The dust then is transferred to METOCLEAN adhesive, tacky pads (DCR-Pads) where it is trapped.

The handle and holders are made of impact-proof plastics, aluminium or stainless steel, don't break in case of dropping and offer a balanced handling.

The elastomer rubber rolls can be cleaned with hand warm water or using our METOCLEAN IPA wipes.

The hand rollers are available in various types, widths and shore hardnesses, also as static dissipative version (ESD)  to meet any technical requirement for DRS-cleaning

 


METOCLEAN Dust Cleaning Roller DTS-HR-Series
The professionals
  

 

 

       Surface cleaning down to particle size 0,5 m

       For films, laminates glass, fabric etc.

       Special elastomer composition with enduring tackyness

       Aluminium-body for balanced, both sides roller bearing

       Shock resistant plastic handle

       Professional quality for robust usage

       Shore hardnesses: 25, 35 and 45 from stock

       Roll width: 151, 302 and 460 mm from stock

 

Also available in antistatic, dissipative version (ESD) with aluminium handle

Antistatic hand rollers are recommended for cleaning plastic sheets, films and foils

 


Handroller METOCLEAN DTS-ESDHR-Series                      to top
Die Professionals
 antistatic, dissipative 

 

 

       Surface cleaning and electrostatic neutralisation

       For surface cleaning of films and foils, plastic sheets, acrylic sheets etc.

       Special elastomer composition, conductive, with enduring tackyness

       Aluminium-body, for balanced, both sides roller bearing, easy handling

       Shock resistant anodised aluminium body and handle

       Professional quality for robus usage

       Shore hardness: 35 and 45 available

       Roll width: 151 and 302 mm from stock

 

Wir empfehlen fr ESD-Anwendungen auch unsere ESD-Bodenmatten und ESD-Kleidung

 


METOCLEAN Dust Cleaning Roller DTS-HR-Series             to top
EXTRA Wide

Hand held rollers of METOCLEAN DTS-HR-Series are also available in 18" width
and of course with suitable tacky pads size 240 x 480 mm

Time saving 18 x 24" panels cleaned with just 1 wipe!


METOCLEAN  Dust Cleaning Roller DTS-HR-Series            to top
EXTRA Small

Hand held rollers and sticks (swabs) for finest artwork cleaning in photographic section and lenses / objectives
Cleaning rollers in width from 10 to 50 mm, swabs with diameter from 2 to 10 mm available


 

Antistatic METOCLEAN  Dust Cleaning Roller DTS-HR-E-Serie  to top

These DCR rollers are very similar to our METOCLEAN DTS-HR-Series but offer cleaning rolls
made of antistatic dissipative special elastomer and full metal handle. Any electrostatic charge
generated while cleaning plastic foils is dissipated through the operator, using personal grounding systems
like our special ESD floormats


 

       Surface cleaning down to particle size 0,5 m

       For films, laminates glass, fabric etc.

       Special elastomer composition with enduring tackyness

       Aluminium-body for balanced, both sides roller bearing

       Shock resistant aluminium handle

       Professional quality for robust usage

       Shore hardnesses: 25, 35 and 45

       Roll width: 151, 302 and 460 mm from stock

 


METOCLEAN Dust Cleaning Roller DTS-ECR-Series          to top
The Best Seller

 

       Surface cleaning down to particle size 0,5 m

       For films, laminates glass, fabric etc.

       Special elastomer composition with enduring tackyness

       Stainless steel body, both ends ball bearings

       One edge free for edge cleaning e.g. in exposing units

       Shock resistant plastic handle

       Professional quality for robust usage

       Shore hardnesses: 25, 35 and 45

       Roll width: 75,0 100, 151, and 302 mm from stock, special widths on request

 

 

 


 

 

Replacement elastomer rollers                                                    to top

for sheet- and web cleaners of all, known brands like TEKNEK; KSM; SDI, MICROCLEAN etc.

the mentioned names are trade marks of the mentioned companies
 

ASMETEC offers highest quality replacement elastomer rollers to suit to almost every known sheet / web cleaning machine.

Special sizes and widhts acc. customers drawing can be made within short time, any quantity at reasonable prices.

 

 

 

Worn out rollers can be re-coated!

 

ASMETEC DCR elastomer rollers are available in various rubber compositions to meet the technical requirements for best cleaning

of any flat surface from dry, unattached particles down to size 0,5 m.

 

For thin films we offer a special coating so that light weighted films do not stick to the DCR.

 

ASMETEC DCR Rollers are available in any desired width, length, diameter and shore hardnesses.

So you are free to design your own dust cleaning machine while using ASMETEC DCR rolls and adhesive rolls.

All we need is your technical drawing to make the DCR rolls to your special requirements.

 

We offer money-back guarantee within 2 weeks after delivery in case you are not satisfied with the METOCLEAN DCR-quality

 

 

                                     


ASMETEC GmbH - Robert-Bosch-Str. 3 - 67292 Kirchheimbolanden - GERMANY - FON +49-6352-75068-0 - FAX: +49-6352-75068-29 - www.asmetec.de - info@asmetec.de

 Copyright 2009 ASMETEC GmbH, Stand:  05. Juli 2011               Home ] Nach oben / Up ]     Impressum  imprint